Emittr v2.0.0 turns rooted Android phones into USB HID decks
Nội dung này chưa có bằng ngôn ngữ của bạn; đang hiển thị bằng English.
Bắt đầu từ đây
Emittr, a Show HN project, released v2.0.0, which turns a rooted Android or Kali NetHunter phone into a hardware USB HID keyboard, trackpad and scrolling deck without host software or drivers. Keystrokes are sent as native USB scancodes at sub-5ms latency and up to 1,000 WPM, and the project says it works in BIOS/UEFI and pre-boot environments. It requires a rooted phone (Magisk, KernelSU, or an Android Linux chroot / Kali NetHunter), a kernel built with USB Gadget ConfigFS support (CONFIG_USB_CONFIGFS=y and CONFIG_USB_CONFIGFS_F_HID=y), and a USB OTG or USB-C to USB-A data cable. A local WebSocket bridge on port 8088 lets a second device on the same Wi-Fi relay keystrokes while the target host stays network-isolated; the project advises keeping that Wi-Fi network private or using the on-screen mode for full offline isolation.
Tạo từ các bài viết · cập nhật 12 phút trước
Dòng thời gian bài viết
Theo các bài viết để thấy sự việc từ nhiều phía.
- Hacker News · AIShow HN: Emittr biến điện thoại Android đã root thành bàn phím USB HID
Emittr là một dự án Show HN biến điện thoại Android hoặc NetHunter đã root thành bàn phím, bàn di chuột và bộ cuộn USB HID phần cứng mà không cần phần mềm hay trình điều khiển trên máy chủ. Các lần nhấn phím được gửi dưới dạng mã quét USB gốc với độ trễ dưới 5ms và tốc độ lên tới 1.000 WPM, hoạt động trong BIOS/UEFI và môi trường trước khi khởi động. Một cầu WebSocket cục bộ tại cổng 8088 cho phép thiết bị thứ hai trên cùng mạng Wi-Fi chuyển tiếp các lần nhấn phím trong khi máy chủ đích vẫn bị cô lập khỏi mạng.
Độ nóng của sự việc này
Chưa đủ quan sát liên tục để vẽ xu hướng.