Opdo publishes dual-camera design for data-center robot heads
Start here
Opdo published a tutorial design for a data-center robot head camera that splits the job between a 127° stereo pair for depth and a 30.5° color camera that puts five pixels on a 2 mm status LED at 3 m. The company says its AI agents ran the lens design and checks, while its engineers set requirements and made design calls. The design uses Sony IMX535 color and IMX545 mono 12.4 MP global-shutter sensors with a 100 mm stereo baseline, plus an 850 nm dot projector that Opdo says cuts the stereo pair's worst depth errors by more than three times, reducing 95th-percentile error on rack faces at 0.6 m from 13.9 mm to 4.1 mm. Opdo says telling red from amber and catching blink patterns on real images is still to be tested. It also offers to deliver production-ready designs with its AI agents and optical engineers using tools such as Zemax, Code V and FRED.
Generated from reports · updated 10 h ago
Report timeline
Follow the reports to see the event from different sides.
- Hacker News · AIDesigning a Robot Head Camera Around the Optics to See a Full Rack and Read 2 mm LEDs
Opdo's AI agents designed a robot head camera that splits the job between a 127° stereo pair for depth and a 30.5° color camera that puts five pixels on a 2 mm LED at 3 m. An 850 nm dot projector cuts the stereo pair's worst depth errors by more than three times, dropping 95th percentile error on rack faces at 0.6 m from 13.9 mm to 4.1 mm. The design uses Sony IMX535 color and IMX545 mono 12.4 MP global-shutter sensors with a 100 mm stereo baseline.
Heat for this event
- Current, comparable range
- 8
- Peak, comparable range
- 10November 16 07:00
- Change in 24 hours
- –
The trend compares the same participants over hours observed continuously, so its range can be narrower than the current heat count. Hover or tap the chart for hourly heat; the arrow keys move through it.