3D-Printed Stackable Mini-ITX Homelab Case for Local AI and NAS
Start here
A maker has built a 3D-printed, modular Mini-ITX case system that stacks magnetically and fits within a 220x220x250mm print volume. The modules cover ATX, SFX and flex ATX power supplies, front I/O, and SAS/SATA disk shelves, so one system can be assembled for different homelab roles. The current build houses an RX 9060 XT with 16GB VRAM, a NAS using used enterprise SAS hard drives, and two NVIDIA V100 32GB GPUs linked via NVLink in a separate housing called "Blue Scream." The maker says the designs are planned for release on Printables.
Generated from reports · updated 13 h ago
Report timeline
Follow the reports to see the event from different sides.
- Hacker News · AI3D-Printed Modular Stackable Mini-ITX Homelab for Local AI and NAS Builds
A maker developed a 3D-printed modular, magnetically stacking Mini-ITX case system sized to a 220x220x250mm print volume, with modules for ATX, SFX and flex ATX PSUs, front I/O, and SAS/SATA disk shelves. The build now houses an RX 9060 XT with 16GB VRAM, a NAS with used enterprise SAS HDDs, and two NVIDIA V100 32GB GPUs linked via NVLink in a separate "Blue Scream" housing. Designs are planned for release on Printables.
Heat for this event
- Current, comparable range
- 7
- Peak, comparable range
- 10November 17 20:00
- Change in 24 hours
- –
The trend compares the same participants over hours observed continuously, so its range can be narrower than the current heat count. Hover or tap the chart for hourly heat; the arrow keys move through it.